Skip to main content

AppCTRL® v2

Smart Charging for Facilities

AppCTRL® is not just software. It is hardware, software and service working together: patent-pending UL 508A pedestals that Pine Shore manufactures and ships, the AppCTRL® v2 app, and Pine Shore's support from project through service.

The AppCTRL® v2 app brings the energy equipment at a facility together in one app: EV chargers, energy meters, smart breakers, solar and battery storage. Each device speaks its own protocol; AppCTRL® v2 speaks all of them, so you don't need a separate app for each one.

It's the same idea BACnet brought to building automation, applied to the whole facility. See every connector, and how customers, projects and billing run in PineCTRL™.

Built for resilience

When the grid goes down, a facility shouldn't have to stop. AppCTRL® brings charging, solar, battery storage and smart breakers together as one system, designed so there is no single point of failure and the business can carry on.

Read the Pine Shore story behind smart service systems.

Hardware

Pine Shore's patent-pending, UL 508A pedestals, manufactured and shipped by Pine Shore, put the meters, breakers and network gear at the charger. We build the control panels in our own UL 508A panel shop and label them cUL US Listed, installed in the pedestal before it ships or shipped separately for installation in the field. See our panel shop and pedestal configurations.

Software

The AppCTRL® v2 app and its connectors bring every charger, meter, breaker, solar array and battery into one view.

Service

Pine Shore supports each site from project and commissioning through monitoring and service, with PineCTRL™ behind every job.

Why one app

Would anyone tolerate a world where every charger, panel and battery needed its own app? AppCTRL® v2 puts them all in a single seat.

Cartoon: an operator juggles separate phone apps for EV charging, solar, battery storage, metering, smart plugs, building controls and breakers
Before: one app per device, one protocol per app.
Cartoon: a relaxed operator sees every device in one AppCTRL screen
After: every device in one AppCTRL® screen.

What AppCTRL® v2 does

  • EV charging over OCPP. Connect OCPP chargers, see their status and sessions, and manage them per site.
  • Energy metering. Read circuit and site meters over Modbus TCP and MQTT.
  • Smart breakers and panels. See and manage connected breakers alongside the chargers they feed.
  • Solar and battery storage. Bring generation and storage at a site into the same view.
  • Building controls. Connects to BACnet building systems.
  • Organizations and sites. Group devices by site and by organization, with an overview page for each site and charger.
  • Open, RESTful JSON API. Every device is reachable through one AppCTRL® API.

Built for the field

Smart EV Charging Pedestal

Pine Shore's patent-pending, UL 508A pedestal (model APPDST06) houses the meters, breakers and network gear for one to two chargers and connects them to AppCTRL®.

One protocol per device, one app for all

OCPP · BACnet · Modbus TCP · MQTT, all through the AppCTRL® RESTful JSON API.

Still on v1?

Pine Shore continues to support AppCTRL® v1 for BACnet facilities.

Contact & product support

For AppCTRL® questions, quotes or support on an existing installation, call 828-553-6257 or email dave@pineshoreenergy.com.

Pine Shore Energy LLC — Smart Service Systems
131 Fayette St NW, Winston-Salem, NC 27101 · PO Box 443, Brevard, NC 28712

AppCTRL® is a registered trademark of Pine Shore Energy LLC. BACnet® is a registered trademark of ASHRAE. UL is a trademark of UL LLC.