Skip to main content

Pine Shore Energy LLC (Pineshore) builds Smart Service Systems for facilities. Our AppCTRL® line is Smart Charging for Facilities: it brings EV charging into the building systems a facility already runs, alongside meters, smart breakers, solar and battery storage.

Where we started. Pine Shore's first EV charging product was a connector that brought ClipperCreek EV chargers, both the CS and HCS models, into BACnet building automation. When Enphase acquired ClipperCreek, the same connector carried over to Enphase EV chargers. We installed our ClipperCreek system, integrated with building automation, at ASHRAE's headquarters, home of the organization behind the BACnet® standard, working with Automated Logic's company-owned Georgia branch. ClipperCreek and Enphase are where we started in EV charging, and they are still an important part of our work. As the market grew, we added newer protocols such as OCPP; see AppCTRL® v2 and our connectors.

AppCTRL® v1, branches and dealers, and any BACnet® system. AppCTRL® v1 is Pine Shore's operator software for EV charging, solar charging and vehicle-to-building inside BACnet systems; we focus on that, not on full building automation infrastructure. AppCTRL® v1 works with Automated Logic's branches and dealers, who buy EV charging systems through Pine Shore, and with any BACnet building automation system. AppCTRL® v1 connectors run on BTL-listed BACnet® controllers. Owners can work with us directly.

Community Based e-Commerce, CaaS, Access Control

Via Branches & Dealers, or Direct

Smart Grid + Integration with Building Systems

Drive traffic to your websites and parking lots

Show destination charging status on your website. Monitor and control chargers with building systems to balance all electrical loads in one app.

Pineshore's
AppCTRL® Workflow

A little planning can save you a lot of money

 

1. Install our EVSE Wire control into building

2. Load CaaS Software Connect to Smart Grid

3. Link real-time data to your websites Setup e-Commerce services

AppCTRL® Community Charging Solutions

AppCTRL® connects electric vehicles to buildings and websites

 

Deploy affordable charging networks that scale to your community. Perfect for State and Local Governments, nationwide franchises, School Districts, State/National Recreational Parks & Forests, Higher Education, Shopping Centers, and more!

ClipperCreek, now part of Enphase

Our first EV charging connector: ClipperCreek CS and HCS chargers in BACnet building automation, carried over to Enphase.

AppCTRL® CaaS

Hardware and software built on open protocols (BACnet®, OCPP, Modbus) to work with building systems and the smart grid.
 

Building automation branches and dealers

Automated Logic branches and dealers buy EV charging systems through Pine Shore for AppCTRL® v1, and it works with any BACnet system. Owners can work with us directly.

AppCTRL® - EV Service Bundles

Community Based e-Commerce, CaaS, Access Control

Via Branches & Dealers, or Direct

Smart Grid + Integration with Building Systems

Pine Shore Energy builds smart service systems for facilities. With its AppCTRL® products and services for EV charging equipment (EVSE), Pine Shore connects EVs to your buildings and your websites. Our EV service bundles combine charging equipment with e-commerce, so a facility can offer charging as a service. Where AppCTRL® v1 is in use, installation and service can run through Automated Logic's branches and dealers; otherwise Pine Shore works directly with the owner.

AppCTRL® is a registered trademark and PineCTRL™ a trademark of Pine Shore Energy LLC. BACnet® and ASHRAE® are registered trademarks of ASHRAE; mention of the ASHRAE headquarters installation does not imply endorsement by ASHRAE. Automated Logic, ClipperCreek, Enphase and all other product and company names and logos are the property of their respective owners and are used only to describe compatibility.