Skip to main content

AppCTRL® v1

Smart Charging for Facilities, inside your BACnet building automation system

AppCTRL® v1 is Pine Shore Energy's operator workstation software for EV charging, solar charging and vehicle-to-building in BACnet building automation systems. Chargers can be seen and managed next to the rest of the building, in the same browser-based interface.

Our focus. Pine Shore focuses on EV charging, solar charging and vehicle-to-building inside BACnet® systems, not on full building automation infrastructure. AppCTRL® v1 connectors run on BTL-listed BACnet® controllers. (BTL, the BACnet Testing Laboratories, tests BACnet products for interoperability.) Pine Shore Energy LLC: BACnet® vendor ID 1266.

Where we started. Pine Shore's first EV charging connector brought ClipperCreek EV chargers, both the CS and HCS models, into BACnet building automation. When Enphase acquired ClipperCreek, the same connector carried over to Enphase EV chargers. Working with Automated Logic's company-owned Georgia branch, we installed our ClipperCreek system, integrated with building automation, at ASHRAE's headquarters, home of the organization behind the BACnet® standard. That is where AppCTRL® v1 began, and it is still an important part of our work. As the market grew, we added newer protocols such as OCPP in AppCTRL® v2.

Branches, dealers and any BACnet® system. AppCTRL® v1 works with Automated Logic's branches and dealers, who buy EV charging systems through Pine Shore, and with any BACnet building automation system. Owners can work with us directly.

Pine Shore continues to support AppCTRL® v1 for existing and new customers whose facilities run on BACnet. Our BACnet work goes back to the 2011 Smart Schools project and our BACnet to Drupal connector. For our own all-in-one facility software, see AppCTRL® v2; projects, quotes and billing run in PineCTRL™.

Why a standard protocol

Before BACnet, every manufacturer's equipment needed its own workstation. A common protocol gave operators a single seat for the whole building. AppCTRL® v1 adds EV charging to that single seat.

Cartoon: an operator struggles with three workstations from Company A, B and C
Before: one workstation per manufacturer.
Cartoon: a relaxed operator runs Company A, B and C from one BACnet workstation
After: one BACnet workstation for everything.

What AppCTRL® v1 does

AppCTRL® v1 gives your team a web operator interface built around EV charging, solar charging and vehicle-to-building.

  • EV charging in your BAS. Pine Shore's driver presents chargers to the building automation system over BACnet.
  • Browser access. Operators use a web browser, with no special workstation software.
  • Custom graphics. Charger and site graphics designed for your facility.
  • Trends, alarms and schedules. Charging equipment is trended, alarmed and scheduled alongside other building equipment.
  • Load balancing with building systems. Chargers can be monitored and controlled with the rest of the building's electrical loads.
  • Remote access. Check and troubleshoot equipment from anywhere.

Who it's for

Any BACnet facility

Sites that run a BACnet® building automation system, from Automated Logic or any other maker, and want EV charging in the same operator interface. Automated Logic branches and dealers buy EV charging systems through Pine Shore.

Existing AppCTRL® v1 sites

Pine Shore continues to support AppCTRL® v1 installations.

Moving to v2

Want EV charging, meters, breakers, solar and storage in one app? See AppCTRL® v2.

Contact & product support

For AppCTRL® questions, quotes or support on an existing installation, call 828-553-6257 or email dave@pineshoreenergy.com.

Pine Shore Energy LLC — Smart Service Systems
131 Fayette St NW, Winston-Salem, NC 27101 · PO Box 443, Brevard, NC 28712

AppCTRL® is a registered trademark of Pine Shore Energy LLC. BACnet® and ASHRAE® are registered trademarks of ASHRAE; mention of the ASHRAE headquarters installation does not imply endorsement by ASHRAE. Automated Logic, ClipperCreek and Enphase are trademarks of their respective owners; their mention does not imply endorsement.